Preface. DEFORMATION, RECRYSTALLIZATION AND TEXTURE.
Analysis of Recrystallization Kinetics From Microstructural
Evolution and Micro- Hardness Determination (M.H. Alvi, B.S.
El-Dasher and A.D. Rollett).
Recrystallisation Growth Rates in Hot Deformed Aluminium (D.J.
Jensen and R.A. Vandermeer).
Fundamental Processes Responsible for Continuous Dynamic
Recrystallization: An In-Situ TEM Study (L.M. Dougherty, I.M.
Robertson and J.S. Vetrano).
Effect of Hot Deformation on Recrystallization Behavior of Al-4.5Mg
Alloy (B. Ren).
The Texture and Structure of Commercial Purity Aluminium After Hot
Rolling (A. Klyszewski, M. Lech-Grega, W. Szymanski and J.
Zelechowski).
Effect of Alloy Chemistry on Microstructural Evolution During
Deformation of Al Alloys (
P. Trivedi, D.P. Field and H. Weiland).
Grain Boundary Sliding and Grain Refinement in As-Cast 7475
Aluminum Alloy Under Hot Deformation (O. Sitdikov, A. Goloborodko,
R. Kaibyshev and T. Sakai).
Static Recrystallization in Al Alloys After Hot Working (H.J.
McQueen, E. Evangelista and H. Farah).
Recrystallization Behavior in Aluminium Alloys After Hot and Cold
Deformation; An Experimental and Modelling Treatment (S. Tangen, H.
Bjerkaas, S. Abtahi, B. Holmedal, T. Furu and E. Nes).
The Influence of Die Shape on the Behaviour of Surface
Recrystallisation (X. Duan and T. Sheppard).
A Sensitivity Analysis of the Work Roll-Strip Interface Parameters
Used During Modelling of Hot Rolling for AA5083 (H. Ahmed, M.A.
Wells, D.M. Maijer and M.R. van der Winden).
Development of Through-Thickness Texture Gradient During Continuous
Cast Processing of AA 5052 Aluminum Alloy (W.C. Liu, Z. Li, T.
Zhai, C.-S. Man and J.G. Morris).
Analysis and Comparison of Dislocation Structures in Cold and Hot
Deformation (G. Winther and N. Hansen).
Microstructure Evolution in Al-3%Cu Alloy During Intense Plastic
Straining at 150°C (R. Kaibyshev, I. Mazurina, I. Denisova and O.
Sitdikov).
SUPERPLASTICITY AND CREEP.
Creep and Superplasticity in Al Alloys (F.A. Mohamed).
Microstructure and Creep of the Al-2Mg-0.2Sc Alloy (E.A. Marquis,
D.N. Seidman and D.C. Dunand).
High Strain Rate Superplasticity of Metal Matrix Composites (T.
Imai, S. Dong, L. Zhen, I. Shigematsu and N. Saito).
High Strain Rate Superplastic Deformation of 30 Vol.% AlNP/6061Al
Composite (J. Niu, L. Han and H. Hu).
High Strain Rate Superplasticity in Aluminum Alloys and Review of
Its Current Commercial Applications (T. Mukai and K. Higashi).
Characterization of Superplastic Response in Al-Mg Alloys (P.A.
Friedman and W.B. Copple).
Superplasticity in a Commercial Al-Mg-Mn-Sc Alloy Subjected to
Severe Plastic Straining (F. Musin, R. Kaibyshev and Y.
Motohashi).
CONSTITUTIVE ANALYSIS, MODELING AND SIMULATION.
Mesoscale Modeling of Cube Texture Evolution During Hot Working of
Aluminum (B. Radhakrishnan and G. Sarma).
Dynamic Response of AA7075 Aluminum Alloy as a Function of
Temperature (Z. Jin, W.A. Cassada, C. Cady and G.T. Gray).
High Temperature Properties and Processing of AA7050 (B.E. Gore, S.
Harnish, H. Padilla, B.J. Robinson, A.J. Beaudoin, J.A. Dantzig,
I.M. Robertson and H. Weiland).
Application of Mesoscale Finite Element Simulations to Study the
Evolution of Cube Texture During Hot Deformation of Aluminum (G.B.
Sarma, B. Radhakrishnan and T. Zacharia).
A Finite Element Model for Crystal Plasticity During Large
Deformation and Comparison with Experimental Measurements (R.
Prasannavenkatesan, B.Q. Li, D.P. Field and H. Weiland).
Formation of Extrudate Surface (T. Sheppard and X. Duan).
A Friction Stir Welding Model Using Computational Fluid Dynamics
(T. Long, T.U. Seidal, W. Tang and A.P. Reynolds).
Modeling Friction Stir Joining as a Metalworking Process (W.J.
Arbegast).
PROCESSING, STRUCTURE AND PROPERTY.
Microstructural Refinement and Control in Friction Stir Processed
Aluminum Alloys for Superplasticity (I. Charit, Z.Y. Ma and R.S.
Mishra).
High-Temperature Mechanical Performance of a Cryomilled Al-Mg-Sc
Alloy (B.Q. Han, A. Verma, F.A. Mohamed and E.J. Lavernia).
Developing a Processing Route for Grain Refinement in an Al-6061
Metal Matrix Composite (Y. Huang, C. Xu, M. Furukawa, Z. Horita and
T.G. Langdon).
Grain Refinement in an Al-Li-Mg-Sc Alloy During Intense Plastic
Straining at 300°C (R. Kaibyshev, K. Saytaeva, F. Musin and Y.
Motohashi).
Development of Homogeneous Microstructure in Pure Aluminum
Processed by ECAP (C. Xu and T.G. Langdon).
Hot Rolling Textures in Al Alloys (J. Hirsch).
Parameters Affecting Strain Rate Sensitivity in Al-Mg Alloys (J.
Mukhopadhyay).
Optimization of Mechanical Properties of Castings in Aluminum
Alloys with Liquid Hot Isostatic Pressing (M. Cabibbo, E.
Evangelista, S. Gallo and V. Latini).
The Optimized Tensile and Fatigue Properties of Experimental
Semi-Solid Aluminum Alloys (S.C. Bergsma, M.Z. Wang and M.E.
Kassner).
Evolutions of Textures and Particles of a Continuous Cast Al-Mg
Alloy During Hot Rolling (X.Y. Wen, T. Zhai, Z.D. Long, C.H. Xiao
and J.G. Morris).
Spray Rolling Aluminum Strip: Process Modeling and Parametric
Studies (S.B. Johnson, J.-P. Delplanque, E.J. Lavernia, Y. Zhou, Y.
Lin and K.M. McHugh).
Spray Rolling Aluminum Strip ? Process Development and Strip
Properties (K.M. McHugh, E.J. Lavernia, Y. Zhou, Y. Lin, J.-P.
Delplanque and S.B. Johnson).
Rolling Process Optimization by Sensor Fusion Control Architectures
(G. Fodor and S. Linder).
The Effect of Homogenization Practice on the Microstructure of
AA6063 Alloys (Y. Bírol, G. Kara, S. Ucuncuoglu and M. Usta).
Tensile Behavior of Open-Cellular Al Foams at Ambient and
Intermediate Temperatures (I. Nieves, F. Arceo, T.G. Nieh and J.C.
Earthman).
Fracture Behavior of Al-Mg Alloy in Elevated Temperature Processes
(P.T. Wang, R.E. Roadman, Z. Jin and S. Alexandrov).
Deformation and Failure Mechanisms in Commercial AA5083 Materials
(M-A. Kulas, P.E. Krajewski, T. McNelley and E.M. Taleff).
Constituent Particle Break-Up During Hot Rolling of AA 5182 (A.
Baldacci, A. Bigot, H. Klöcker and J.H. Driver).
Microstructure Study During Hot Deformation Processing of Aluminum
7075 with Rapidly Engineered Dies (D. Mathur, K. Agarwal and R.
Shivpuri).
Structure-Mechanical Property Relationship for Al(Sc,Zr) Alloys
(C.B. Fuller, D.N. Seidman and D.C. Dunand).
Effect of Forming and Treatment Parameters on Mechanical and
Fatigue Properties of Al-Li Extrusions (K. ?perlink, V. Ocená?ek
and K. Macek).
Author Index.
Subject Index
Z. Jin is the editor of Hot Deformation of Aluminum Alloys III, published by Wiley.
Ask a Question About this Product More... |