Hurry - Only 4 left in stock!
For best results, LipSense products must be applied to clean, dry lips. For a more defined, finished look, use LinerSense before applying the lip colour. LipSense needs to be shaken horizontally prior to application. LipSense is applied by using a layering technique. After placing colour onto the wand, begin application at the corner of mouth, (usually) using the longest length of the applicator. Keep lips apart, and follow the natural shape of lips starting at the outer corner of the mouth. With one continual stroke, apply one layer of colour from one corner to the other corner of the bottom lip, then one layer of colour to the top lip. Apply the colour, moving the applicator in one continuous direction versus going back and forth like you would with lipstick. Let each layer set for a few seconds before proceeding to the next. It is not recommended to apply more than three layers of colour. When the application of the third layer of colour is complete and the colour has set, apply one of the LipSense Moisturising Glosses over the final layer. Do not press lips together until the moisturising gloss has been applied onto the last layer of lip colour. After applying the gloss, press your lips together to smooth in the moisture rich gloss and enjoy the glorious look and feel of this long-lasting, advanced colour technology.
Important notice: While we work to make sure that product information is correct, manufacturers can change their ingredient lists. Actual product packaging and materials may contain more and/or different information than that shown on our website. We strongly recommend that you always read labels, warnings, and directions before using or consuming a product and that you do not solely rely on the information on our website. If you are not happy with a product and have not used it you may return it at anytime for a full refund.